factuncle1

How to Replace Door Locks It isn't easy to change your door lock. It is essential to protect your home from potential intruders and also to replace locks if you get an occupant change or you are letting out your home. The majority of modern locks are designed for standard door widths. If your door is wider then you'll require a “thick door” kit which has longer screws and a longer tail piece for the deadbolt. Remove the old lock If you're replacing the lock on your door it is necessary to remove the old lock from the door. This can be accomplished with the use of a few tools, but it's important to take care not to damage the door or frame. Using the correct tools will save you money on future repairs. Take off the screws that are the trim and handle. You can use a screwdriver to do this. Once the screws are removed, you can remove the trim. You can then gain access to the screw that binds the handle and trim to the door. After removing the screw, you can remove the handle and remove the lock cylinder from the door. When you can't wiggle your key inside, it is an indication that the lock is not working. This is because the tumblers are getting worn out and eventually will stop moving upwards or downwards and thereby limiting the lock's ability to function. It is necessary to have the lock rekeyed by a locksmith if this occurs. When you're ready to replace your deadbolt, start by taking off the screws that hold the faceplate in place. If your kit doesn't include new screws, you can purchase them at an hardware store. If you're installing a mortise lock you must also take out the screws that attach the external rose plate to the door. After removing the screws, remove the plate and the dead bolt. Then, look for a pinhole on the interior trim of the handle. If you find one, slip a straightened safety pin into it. You can also make use of a flat screwdriver to press against a depression. This should release the handle and reveal screws that can be removed to free the entire lock case from the door. Installing the new lock Installing a new lock could be accomplished easily regardless of whether you need to replace your lock following an incident of burglary, or simply want to update your door's appearance. However, it is essential to measure the door to ensure that you buy an appropriate lock that is the correct size for your door. This is particularly important for deadbolt locks that have to be of a certain size to fit into the bolt pocket and strike plate. Ask your local hardware store for advice when you're not sure how to measure. If you're replacing a mortice lock, take the centre rail of the lock to guide you in the placement of the new mortise lock. Once you've marked the location of the lock, make holes along the centre line the same size as the lock. Then, chisel the wood until you have a rectangular space to fit your mortice lock. Insert the lock and then outline the faceplate with a marking blade. Mark and drill screw holes to secure the faceplate in place. When you are rekeying locks, you can save money by purchasing a starter kit which includes keys that can be re-keyed and a key blank. These kits are available from many online retailers as well as home improvement and hardware stores. These kits also come with instructions to help you complete your project. If you're renting, make sure to check your lease before changing locks. You might be required to give the landlord the key to the new locks. If so, you may be required to take out the old lock and replace it with a standard lock. You can purchase a standard lock at your local hardware store or you can invest in an advanced lock that is connected with your home's WiFI and allows you lock and unlock the door remotely. The best option is a Schlage Smart Lock, which is compatible with all door knobs and levers. It can also be linked to your home security hub that is smart, allowing you to receive alerts when your door is locked or opened. Installing the new lock A damaged lock poses an enigma for security, which is why it is essential to replace it quickly. The good news is that replacing locks for doors is a quick and easy project that anyone can do. The first step is to remove the old lock from the door. The screws that hold it in place are unscrewed and the lock is pulled out. Depending on the type you have, you may need an Allen wrench or screwdriver. Save all the components of the old lock and store them in a secure location. Next, install the new lock into the door. The majority of kits come with an image of the cardboard template that shows how the lock will fit on the door. If the template doesn't fit your door, use a pencil to trace around it or a chisel for extra material removal. After the new lock is in place, make sure the latch plate inside is aligned with the mortise hole for an ensconced fit. Be careful not to overtighten the lock when installing it. This could cause the lock to crack or even break. If you have a lock with keys ensure that the spindle is aligned with the knob's hole. If it isn't then you can make use of a screwdriver to push the spindle into the lock and into the knob. Install the decorative baseplate that is included with the lock once you've installed it. If the lock doesn't come with a decorative base plate you can purchase one that matches the hardware. RepairMyWindowsAndDoors is to test the new lock to ensure that it works. You can do this by inserting the key into the lock and turning it to make sure that it is able to open. If this doesn't work you need to seek out a locksmith. You can also avoid burglaries by having professionals reset your locks. This process involves changing the lock's internal tumblers to ensure that it will not accept the old keys. This will keep your home secure and provide you with peace of mind. Test the new lock Installing the lock from scratch is a great way to ensure that it will work as intended. This is why it's essential to follow the instructions carefully. You may not be able open your door if don't. If you're not sure what to do, you can contact a professional locksmith for help. A locksmith can provide advice on the best locks for your house. If you are having difficulty opening your lock, there might be a problem with the handle or latch. You can lubricate the latch using graphite or spray it with WD-40. This can sometimes help fix the issue. However, you might need to replace the latch completely if it's not working correctly. Another possibility is that the lock has been installed incorrectly. The door handle clip is usually damaged or missing from the new lock. In this case, you should grab the handle from the inside and insert a retainer clip. The handle will then be attached to the lock and the lock will be tested. After you've changed the lock, it's important to check the keypad to make sure it's functioning properly. You can test it by putting the key in and turning it. If the keypad is functioning correctly, it will unlock and lock your door. Check the deadbolt to make sure it's working correctly. If it's not, you should take the latch off and remove the Phillips head screws on the sides of the door in order to unlatch it. Replace the old deadbolt with the new one. Orient and load the deadbolt lock in the correct way. Spindle testing is another way to test a new lock. This can be accomplished by inserting a screwdriver in the spindle. This test should always be conducted prior to reinstalling the lock to avoid any mistakes.